Common tire repair methods for car tires

The most common way to repair a tire is to insert a special rubber strip into the puncture part of the tire. The master of the tire repair shop usually refers to it as a gun-type tire repair. The biggest advantage of this method is that it is quick and convenient, it only takes a few minutes, and there is no need to pry the tire from the rim. The defect of the gun-type tire repair is that it is not durable enough, and it is also difficult to cope with larger wounds. Usually it can only be used as a temporary remedy.

Another way to repair tires is sticky repair. The so-called sticky repair is to remove the injured tire from the rim, and after finding the wound, stick a special tire repair rubber from the inner layer of the tire to complete the leak. The advantage of this method is that it can repair larger wounds, but the disadvantage is that it is still not durable enough. After a period of water immersion and high-speed operation, the repaired area will leak air again.

The most thorough tire repair measures are often said to be fire repair. Fire repair also needs to pry off the tire, and then attach the special raw film to the wound, and then use a baking machine to bake the wound until the raw film is completely attached to the tire. The advantage of fire compensation is that it is very durable, and there is basically no need to worry about repeated air leakage. However, it also has disadvantages, that is, the technical requirements during construction are relatively high, because once the fire control during baking is not good, it is very likely that the tires will be scorched, and severely deformed. In that case, the tires may be damaged. It’s big.

As for doing it yourself, many automatic tire repair agents on the market have certain effects, but they also have strong limitations. For example, if the leaked tires have leaked out, it will be difficult to work. The biggest defect of this tyre repair agent is that it is very corrosive. Whether it is a steel ring or an alloy rim, there will be greater damage for a long time, and this damage directly leads to the failure of the steel ring and the tire to seal Strictly causes air leakage.

Like this article?

Share on Facebook
Share on Twitter
Share on Linkdin
Share on Pinterest

Leave a comment