How do I change forklift tires by myself?

When replacing forklift tires, be aware of the danger of being squeezed when the jack slips off. When using a jack to jack up the forklift, make sure that the jack is firm, and it is forbidden to crawl under the jacked forklift.
Forklift tires have high air pressure and are dangerous.
Do not disassemble/assemble tires, inner tubes, rims, or inflate the forklift tires on the forklift. These jobs must have special equipment and skills, and these jobs require professionals to receive professional training before they can operate.
Remove the forklift load, park the forklift on a flat, solid road, and apply the parking brake. Place a block under the forklift tire to be replaced. The forklift must be jacked up at the specified jacking position. When replacing the front tire, it should be under the outer mast, and when replacing the rear tire, it should be under the counterweight.
See the forklift truck top to the forklift tire, and still slightly in contact with the ground, place a block under the frame to avoid falling. When replacing the front tires, place a pad in the front position. When replacing the rear tires, place pads on the rear.
For forklift tires with split rims, do not loosen the rim connecting bolts. After decompression, be sure to loosen the hub nut with the split rim. In order to effectively ensure safety, when inflating forklift tires or replacing tires, place your body in front of the tires and do not work on the side of the tires. When adjusting the air pressure with an air compressor, adjust the compressor pressure in advance to Rims that are resistant to deformation or cracks are extremely dangerous. When installing replacement tires, check thoroughly and do not use tires with deformed or cracked rims.

Like this article?

Share on facebook
Share on Facebook
Share on twitter
Share on Twitter
Share on linkedin
Share on Linkdin
Share on pinterest
Share on Pinterest

Leave a comment

en_USEnglish